HTLS Conductor Products --- STACIR/AW Conductor is a new type of
overhead conductor
STACIR/AW conductor is a new type of overhead conductor. The use of trapezoidal wire increases the cross-sectional area of
the conductor, so that the conductor has the effect of increasing
the conductive capacity.
Under the same size, STACIR/AW conductors have better current
carrying capacity than traditional conductors. At the same time,
INVAR conductor is composed of aluminumclad invar core and
thermal-resistant aluminum alloy wires. This conductor is suitable
for old line
modification. It can keep the same sag while increasing capacity.
The main aspect of this type of conductor is the possibility of
sliding between the outer layer and the core. Steel and aluminum
are independent, so at high temperatures, the outer layer may stay
on the steel core.
The outer conductive layer is made of super heat-resistant Al-Zr
alloy, and the working temperature can reach 210°C.
The main features of this product series are:
INVAR core and outer layer independently have knee points at
installation temperature
Limit the sag as the temperature increases
The thermal expansion coefficient above the knee point related to
the INVAR core maintains the mechanical strength of the conductor,
and the continuous working temperature is up to 210° C
This technique requires a skilled installation expert stage.
It is suitable for ACSR replacement on flat land or with small
level differences.
| ACSR | Aluminium conductro steel reinforced |
| AAC | All Aluminium conductor |
| AAAC | All aluminium alloy conductor |
| PROPERTIES | STACIR (ACSR MOOSE EQUIVALENT) | STACIR ( ACSR ZEBRA EQUIVALENT) | STACIR (ACSR PANTHER EQUIVALENT) |
| Typical factors | 3.53 mm | 0.1390 in | 3.18 mm | 0.1252 in | 3.00 mm | 0.1181 in |
| Reference specifications | IEC 62004 | IEC 62004 | IEC 62004 |
| Total cross section area | 597.00 mm2 | 0.9254 in2 | 484.50 mm2 | 0.751 in2 | 261.50 mm2 | 0.4054 in2 |
| Conductive wire | Al Zr AT3 | Al Zr AT3 | Al Zr AT1 |
| Core wire | Aluminium clad Invar | Aluminium clad Invar | Aluminium clad Invar |
| Conductor diameter | 31.77mm | 1.2508 in | 28.62 mm | 1.1268 in | 21.00 mm | 0.8268 in |
| Weight | 1993 kg/km | 1339.2 lbs/mile | 1582 kg/km | 1063.1 lbs/mile | 939 kg/km | 631 lbs/mile |
| Ultimate tensile strength | 14641 kg | 32277.84 lbs | 11968 kg | 26384.89 lbs | 8436 kg | 18598.17 lbs |
| DC resistance at 20°C temperature | 0.06 Ω/km | 0.09Ω /mile | 0.07Ω /km | 0.11Ω /mile | 0.13 Ω/km | 0.21Ω /mile |
| Maximum operating temperature | 210°C | 410°F | 210°C | 410°F | 210°C | 410°F |
| Current carrying capacity at maximum operating temperature | 1871 Amp | 1626 Amp | 1040 Amp |
We also can offer other full range of overhead conductor, if you
have any need, Just feel free to contact our sales team!
Shanghai Qifan Cable Co., Ltd. founded in 1994, has been
specialized in R&D and manufacturing of electric wires and
cables for more than 20 years, and it has advanced production and
testing equipment.
Qifan Cable has ability in producing many varieties of cables, such
as High Voltage cables, Medium Voltage cables, Low Voltage cables,
Control cables, Instrument cables, Building wires, Rubber cables
etc. Qifan Cable has sold its products to over 30 countries and
regions in Asia, Europe, Oceania, America and Africa. As a result,
they are widely used in such industries as water conservancy,
electricity, metallurgy, petrochemical, railway, transportation,
communication, construction, urban, infrastructure construction,
etc.
Since its establishment, Qifan Cable has abided by the operation
principle of quality foremost. It took the lead in passing ISO
9001:2000 quality system certification in 2006 and ISO 14001:2004
environmental management system certification.
Qifan Cable-Make pioneering efforts and forge ahead!
Super Thermal Alloy Conductor: The conductor is made of a super
thermal alloy material. This material is specifically engineered to
have high thermal conductivity, allowing for efficient heat
dissipation during power transmission.
Invar Reinforced: The conductor is reinforced with Invar, which is
a nickel-iron alloy known for its low coefficient of thermal
expansion. Invar helps to minimize conductor sag or elongation due
to temperature changes, ensuring the stability and reliability of
the power transmission line.
